If you have a gate sliding and you want to install an automation system for it, you need to know a few things and features that you need to take into account:
Weight of the wing (sheets or canata) of the gate.
For example, if you have a 400 kg sliding gate, you'll be looking for an automatic sliding gate kit with calibrated motor for 400 kg or more. We recommend that you take larger motors, especially if the kitchen is covered with polycarbonate, board or wood. Plated this way, the kitchens will be porter and when the wind blows, the motor will not be able to open or close the kitchens, there being the risk of its burning or the kitchens to remain open. The power of the motor must be calibrated according to the weight of the wing of the gate that it must move from the closed to the open and vice versa. It is well taken into account a reserve of force of at least 20% higher to avoid scorching the motor.
Length of the wing (sheets or canadillos) of the neck.
By the rule the engines for automating the sliding gates are designed and made by the manufacturer for a certain weight and a certain length of the gate wing. An motor of 400 kg and 6 meters will be able to operate a gate of up to 400 kg and up to 6 meters. Above these motor values the motor cannot function in the parameters designed. Check these values carefully.
Cycle of work.
Depending on how many stockholders we need to use every hour or day, we'll look for motors with the greatest working cycle. The recommendation would be to be as big as possible to avoid heating and burning the motors.