Technical advice: 021 450 60 70 · Delivery nationwide · Blog

AUTOMATION
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Accumulator for gate automation: how to choose backup battery

Parts for exchange automation

Accumulator for gate automation: how to choose backup battery

A gated automation accumulator retains functional gates during a current pen. It works mainly on 24 V engines, and the correct model depends on the engine series, voltage and how the power plant charges the battery. Otherwise, just keep the manual unlocking.

In short: check the voltage, engine series and charger, then choose Nice, Ditec or Somfy, not one by chance.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A suitable spare battery gives you peace of mind in storms and current feathers, especially if you have only one car input. Select the model indicated for the engine series, check whether the power plant has a charger or needs a separate plate and periodically test several cycles without power supply. View all models in category Accumulating batteries and choose the accumulator according to your range, after the engine series and the voltage of the power plant.

Without power, an automatic gate remains exactly where it stopped. A gate automation accumulator solves this problem with compatible engines. However, not every battery goes on any motor. In this guide we explain how you read voltage, capacity and compatibility, with examples from the Automatization Store range.

Why do you need a battery for gate automation

The power out comes just when you don't expect it, usually on the storm. In this case, the 24 V reserve battery engines continue to open and close the doors. 230 V engines, instead, do not normally use internal accumulator. Therefore, if you want to run on the power supply, choose from the start a 24 V motor with battery support.

The battery also helps at the gates where access matters permanently. For example, in a courtyard with a single car entrance, a gated automation accumulator avoids the situation where the car stays outside.

Nice gate backup battery

Nice offers batteries that connect directly to the control unit. Nice PS124 works at 24 V and has the integrated loader. The description shall be provided for Nice barriers, but also for systems with Nice control units. Then Nice PS324 follows the same logic, still at 24 V.

For Nice WALKY engines, there is Nice buffer battery PS424. At the same time, the Nice PS524 charger works with 7 Ah batteries. So, in Nice, the battery code depends on the engine series, not just on voltage.

Nice coupling plate CARICA

Some control units don't charge batteries alone. In that case, Nice plate CARICA Make the connection. Its description indicates compatibility with 24 Vdc engine control units and a 24-hour recharge. Therefore, after a long break, a gate automation accumulator needs a day to get back to full. If you change the power station, see control stations.

Backup accumulator: Ditec kits

Ditec separates the batteries into dedicated kits. IONKSBU Ditec Kit Contains the charging module, connectors and mounting accessories for DITION4LS and DITION6LS engines. 2 × 1,2 Ah accumulators do not come in the kit, so you order them separately. On the other hand, Ditec BBU20 kit comes with two accumulators of 2.2 Ah, in an IP55 box of 187 × 261 × 105 mm.

BBU20 solves the engines in the PWR series, which have no room for battery inside. Thus, you mount an automation accumulator close to the motor, in a separate housing.

Somfy engine accumulators

Somfy has dedicated batteries on the show. For example, range includes Axovia accumulator and the 3S i/RTS variants, plus a set for the Invisio i engines. In other words, at Somfy you're looking for the battery by engine name.

Battery for automation: universal batteries

Some equipment uses standard lead-acid batteries. Powertech APC1 has 12 V and 1.3 Ah, with a size of 98 × 24 × (52+6) mm and 0.3 kg. However, a universal gate automation accumulator only works if the voltage, capacity and connectors meet the central requirements. In addition, two 12 V batteries connected in the series give 24 V, but the assembly makes him an electrician.

Small batteries have other roles. For example, Nice FTA2 2 Ah and FTA1 7 Ah power Nice FT210 and FT210B devices. So, not every battery in the category power the engine.

Ability in Ah, simple explained

The capacity shows how much energy the battery stores. In other words, a 7 Ah battery holds more than a 2 Ah battery at the same consumption. However, the actual number of cycles depends on the weight of the portion, the friction and the temperature outside. Winter, for example, batteries are dropping faster. Therefore, not based on a fixed figure, but test your throat with the power off. If you have high traffic, choose the option with higher capacity, such as Nice FTA1 of 7 Ah on compatible devices.

How to choose accumulator for gate automation

  • Read the voltage of the engine and power plant, usually 24 V.
  • Note the exact engine series, such as WALKY, DITION or Axovia.
  • Check if the power station has a charger or you need a separate plate.
  • Compare the capacity in Ah to the number of cycles you want to run.
  • Measure the free space in the engine housing or the power plant box.

In addition, a cold automation accumulator ages even if you don't use it often. That's why you periodically check the kitchens for a few more cycles with the power off. If the battery drops quickly, you replace it with the model indicated by the manufacturer. All models find them in the category Accumulating batteries.

Power out and emergency access

On a long break, even the best battery is unloaded. Therefore, keep the unlock key handy and show everyone in the house how it works. At the same time, free access for emergency interventions matters a lot. Recommendations on fire prevention and evacuation find on site IGSU. Thus, a gate automation accumulator becomes a part of a plan, not the only solution.

Frequently Asked Questions about Accumulator for Gate Automation

Is battery going to a 230 V motor?

Usually, no. The reserve batteries in the category are mainly for 24 V systems. For 230 V, the spare power supply is set by an electrician.

How long does the recharge take?

Depends on the model. For example, the description of the Nice CARICA plate indicates a 24-hour recharge.

Can I put a battery on another brand?

Sometimes, yes, if the voltage, capacity and connectors match. However, we recommend the model indicated by the engine manufacturer.

How do I know the battery needs to be changed?

Stops feeding and counts the cycles. If cooking stops after very few moves, replace the accumulator.

View all models in category Accumulating batteries. If you don't know which gate automation accumulator fits your engine, the Automatizări Store team helps you choose after the engine series.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).

Video clips played directly on YouTube (Google). When playing, YouTube can store data in the browser.