
Gate key control: apparent, recessed or vandal
A keyed gate control gives you a fixed point of action near the entrance, without remote control and without retention code. It is especially important for companies with changing staff, for courts with many users, and as a backup solution when the remote control battery is unexpectedly failing.
In short: choose between seemingly built-in mounting, check the cylinder and the keys, then make contact at the free entry of the plant.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A well-chosen selector resists good years by the gates and does not require daily attention. The assembly apparently fits on metal poles, and the framed version shows discreetly in the wall. For exposed areas, the anti-vandal metal casing makes a difference, especially near the street. Before ordering, check the free input of the plant and the number of keys you need for your family or personal. Then choose the right model from the category Key selectors.
A key control for the gates remains one of the simplest methods of operation of an automation. The selector sits next to the gate, and the key spin sends a pulse to the command unit. Thus, gate starts without remote control, without application and without any retention code.
Here we compare the real models in the range: Nice EKSEU and EKSIEU, Came 806SL, Motorline SCMV150, Roger R85/60ES, Beninca TOKEY and Nice KIOMINI. Then we'll see how you read the selector at the power station and where each variant makes sense.
When it makes sense a key command for the gate
The remote solves the access every day. However, there are situations where a keyed gate control adds a clear plus:
- Service personnel receive a key, not a remote control that is easily lost.
- At a multiple exchange firm, the key offers a fixed control point near the entrance.
- The remote control battery is sometimes downloaded exactly when you need it, and the selector remains the backup solution.
- Rolls and shutters use the same type of key button, e.g. Motorline SCMV150.
In other words, the selector does not replace the remote control. Instead, complete the system with a control that is not dependent on batteries or radio signals.
Key selector: apparent or recessed mounting
First, the decision holds the wall or the pillar. A pattern appears to be caught directly on the surface, and a recessed one enters a dose of the wall.
Appearing mounting selectors
Model Nice EKSEU has a European cylinder and a hard plastic housing. In addition, the housing houses electrical contacts and levers. Came SELD1FDG (806SL-0050) is also mounted outdoors and has blue light backlight. Therefore, you find it easy and evening when you get home.
For exposed areas, it is worth considering Motorline SCMV150 selector. It has an anti-vandal metal housing and returns automatically to position 0. So, such a key control for the collars is better to deal with blows and attempts to force.
Recessing selectors
Version Nice EKSIEU shall be mounted at 13 mm distance from the wall. Thus, almost the whole body remains in the wall, and in sight only the face of the cylinder appears. For the dose, Nice offers the model EKA03, with a depth of 66 mm.
The Came, set selector 806SL-0020 Combine blue backlight with cylinder lock. In addition, model 806SL-0100 uses DIN cylinder locks for 230 V controls. Both come in the grey color RAL7024, so they fit on most faces. For a brick-walled house, a key control for framed collars looks the cleanest.
What you check in the cylinder when choosing a key selector
The cylinder decides how safe the access remains. Almost all models in the range use European cylinder or DIN locks. If you lose a key, check first if the manufacturer offers spare keys. For example, for EKSEU and EKSIEU there is Nice key CHEU. However, if you suspect that a key has reached a foreign person, it changes the cylinder or the whole selector.
Before ordering, follow a few concrete details:
- How many keys you get in the package: Motorline SCMV150 comes with two keys for the European cylinder.
- If the key returns alone in the position of rest after command.
- What tension can the contacts support, as some models indicate 230 V or 250 Vac.
- Housing material: plastic resistant, cast aluminium or metal.
How to tie a key control to the central gate
From an electrical point of view, the selector functions as a contact. You rotate the key, the contact closes briefly, and the power station receives the order. Then the key comes back, and the contact opens again.
A lot of power stations have a step-by-step entrance, which means open-stop-close to successive impulses. In addition, some selectors have two contacts. Thus, a left turn sends "open, and one to the right" closes. Check the power plant scheme before connecting, because the inputs differ from one manufacturer to another.
A keyed gate command doesn't usually require its own power supply. Usually, the cable up to the power station has two or three wires. However, models with backlighting also need power for lighting. If you switch the power station, choose one of the control stations which has a free entry for wired orders.
Selectors with special functions
Some key selector models do more than just a push. Nice KIOMINI selector has a control button and unlock mechanism for the mechanical cable interlocked. The manufacturer makes it from cast aluminium, so it resists well outside. In addition, the compact dimensions make it discreet on the pole.
On the other hand, Roger R85/60ES uses a universal micro-slip, easy to change due to the special housing. Therefore, at a malfunction you replace the small piece, not the whole selector. Beninca TOKEY and Powertech PKS-1 also complete the range for the installations of these manufacturers. So, you find a key control for the gate for almost any automation brand. All these models you see grouped in the category Key selectors.
Where you mount a key selector
- On the pole of the gate, at a comfortable height for driver or pedestrian.
- In a place where you see the throats during the movement.
- Away from the area where the gate sheet moves.
- Under a stretch, if the chosen model does not have an outer shell.
At the same time, avoid the assembly behind the gate, where you should stretch your hand through the fence. For cylinders and locks there are European standards, and their list can be found at Standardisation Association of Romania.
Key control for the gate or code keyboard?
First, both variants provide remote control-free access. But the keyboard only requires a code, which you change at any time. The key, instead, involves a physical piece, but it does not depend on the user's memory. For a villa with few users, a key control for the gate remains the simplest solution. If you want to compare, see and Code selectors. For wireless buttons, it deserves a look in the category control accessories.
Frequently Asked Questions: Key Command for Gates
Does a key selector work without power?
The selector only sends a pulse to the power station, which means a short signal. Therefore, without power at the power station, the gates do not start with the key either. For current feathers, you use manual engine unlocking or a compatible accumulator.
Can I mount the selector on any automation?
Generally, yes, if the plant has a wired order entry. However, check the type of entry and contact voltage. For example, Nice EKSIEU matches, according to the manufacturer, all Nice automations.
What do I do if I lose the key?
For a key control for Nice EKSEU or EKSIEU gates, control the key exchange CHEU. Otherwise, replace the complete cylinder or selector. You also check who else has keys in circulation.
Is there a key picker in the rain?
The exterior models, such as Nice EKSEU or Came SELD1FDG, have housing designed for outdoors. For highly exposed areas, choose a metal housing, type Motorline SCMV150.
Compare apparent and embedded variants in the category Key selectors. If you don't know what fits your power station, the Automatizări Store team will help you choose a compatible gate key command.


















