
Steel or metal insert rack: how to choose after the gate
A metal insert rack collar combines the technical plastic body with a core of steel. The result runs silently on the engine pinion and resists well at the light and medium gates. However, at the heavy gates, the full metallic option remains the safe choice. The difference holds weight and profile.
In short: choose the material after the weight of the portion, check the tooth module and profile, then leave a small game between pinion and rack gear.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
Gear rack transmits all the engine force to the gate, so it deserves carefully chosen. The plastic version with metal core usually brings quietness to the light and medium gates, and the galvanized steel takes over the heavy gates and intense use. Check the module, profile, catch and play the pinion. It also keeps the screws and distances recommended by the manufacturer as they keep rack racks aligned. See all the models in the gear racks category, and our team helps you choose the right option for your portion.
At a sliding gate, the engine doesn't push straight through. He spins a pinion that engages a rack rack wire caught by the frame. Therefore, the choice between a metal insert rack and one of the steels influences noise, wear and safety. Examples below come from the category Gear racks, with FAAC, BFT, Nice, Proteco, Roger, Quiko, GiBiDi, Fadini, Somfy and Sommer models.
What does metal insert rack rack mean
First, look at the section: the teeth are made of technical plastic or nylon, and inside there is a steel profile. Plastic reduces the noise in contact with the pinion. Instead, the metal core prevents the bending at length. Thus, a rack with metal insert remains straight even at variations in temperature.
- BFT CP has section 22x22 mm and length of 1000 mm.
- Protect PCRB120 comes in two pieces of 500x20x26 mm.
- Roger N4 uses M4.
- FAAC 30x20x1000 mm has nylon body and mounting supports included.
Weight limits on product data sheets
Producers indicate, moreover, quite clearly where the plastic stops. For example, in the FAAC 30x20x1000 mm model, the manufacturer does not recommend casts of more than 400 kg. Thus, a rack-to-metal-inserted gear fits mainly with the light and medium residential gates.
On the other hand, the metal models rise much higher:
- Quiko QK-CRF3012 It covers gates of more than 500 kg and has a three-point grip.
- GiBiDi AJ91112/3 has 4 meters of galvanized steel, with 12 distances, for gates from 600 kg.
- Proteco PCRB102 offers the two-piece metallic version of 500x20x26 mm.
Gear rack metal for heavy gate
A metal rack gear supports large forces without deformation. In addition, it best resists intensively used gates, such as those of the firm. However, it runs a little louder than plastic. Galvanising or zincning protects the corrosion steel.
For example, Nice ROA8 measures 30x8x1000 mm, has zinc layer and comes with screws and spacing. At the same time, Fadini 204L has the same dimensions, 30x8x1000 mm, and fixing holes. Moreover, the generic 1000x30x12 mm model completes the range of steel.
Teeth module: rack rack module 4
The engine pinion and rack gear shall have the same mode. Most of the models in the category are of type Gear rack module 4, notated and M4. For example, Nice ROA8, Fadini 204L, Roger N4 and Quiko QK-CRF3012 indicate module 4. Therefore, check the pinion module before ordering, even if you choose a metal insert rack.
Special profiles: Somfy and Sommer
Some brands use their own profiles. Somfy's got a rack collar with bottom grip, 1 metre. Instead, Sommer SCRM01-28 measures 1018x60x40 mm and has PVC body. In other words, these models follow the manufacturer's system. Therefore, check compatibility with the engine before choosing them.
Step-by-step assembly: plastic or metal rack gear
The assembly decides how long the rack is going to last. First, open the doors completely and place the first segment on the pinion. Then fix the segments one after the other, with the teeth aligned at the junction.
- Leave a small game between pinion and rack gear, according to the engine manufacturer's instructions.
- Control the couplings with a piece of rack gear used as a ruler.
- Press all screws and distances along the length.
- Move the collars manually and listen if there are frictions on the metal rack or plastic rack.
In practice, a metal insert rack wire directly supported on the pinion transmits the weight of the portion to the motor. Thus, the reducer is used prematurely. That's why the right game matters as much as the material.
Plastic or steel rack gear: quick comparison
- Noise: The plastic runs more smoothly.
- Weight supported: Steel gains clearly.
- Corrosion: plastic does not rust, and steel requires zinc.
- Rigidity: the metal core reduces the difference from the steel.
So, for a regular yard gate, a plastic core steel rack rack provides a good balance. Instead, for heavy gates you choose steel. Especially at the gates with full board, which catch wind, the reserve of resistance matters. Also, think about the frequency of use: a firm gate makes dozens of cycles a day, and a house gate only a few.
At industrial gates, the work on moving mechanisms involves risks. General recommendations on safety at work found at European Agency for Safety and Health at Work.
Time-use and maintenance
A well-mounted metal rack collar requires little maintenance, and the same plastic. However, some periodic checks prevent major defects. First, clean the teeth of sand, leaves and ice, especially winter. Then check if the screws have weakened due to vibration.
At a metal insert rack rack, track plastic teeth in the starting and stopping area. The highest demands arise there, because the engine accelerates and brakes. If you see broken teeth, change that segment, not the whole line. Instead, at the steel, he chases the rust from the catch holes. In other words, each material has its weak point, and a careful look twice a year usually arrives.
Frequently asked questions about metal insert rack rack
Can I combine different brand segments?
We don't recommend it. The profiles differ slightly, and the combination produces shocks when passing the pinion.
How do I calculate the required length?
Measure the length of the gate and add a reserve for the full race. Some models are sold on linear meter, such as FAAC and GiBiDi.
When do I change a worn metal rack?
When your teeth are kneaded, jumps or rhythmic noise appear. In this case, also check the engine pinion.
Is a rack rack with a metal insert going at 500 kg?
Depends on the model, but FAAC indicates a limit of 400 kg for its version. For heavier gates, choose steel.
Compare each metal insert rack gear in category Gear racks and check the right engine between engines for sliding gates. The Automatizări Store Team helps you choose the correct option.


















