
Automation of outer blinds, oblonas and pergolas: control guide
An automation of the exterior blinds allows you to adjust the light and heat in the house without opening the window. The project has three parts: the engine, the control unit and the control point. The same principle applies to rolling oblones and pergolas with adjustable blades.
In short: controls the NiceWay or phone locks via Nice CORE, Motorize shutters with Giro or Rondo and parrots with Patio.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
Plan the shadow before finishing: cable track, window groups and place of each control point. NiceWay wall tiles mount without building works, and Nice CORE Get the order on the phone. For heavy shutters it counts weight and axle, and at pergola the actuator's force. See all subcategories in Shadow automations and choose the right solution for your home, from the motor to the wall plate.
Any external gate automation has two parts: the engine in the cage box and the control system. Category Shadow Automations in the Automatizări Store covers especially the second part, plus motors for shutters and actuators for pergolas. Therefore, this guide works as a map: we show you what you find in each subcategory and how you combine them.
Map of the shadow automation category
Category Shadow automations has five subcategories of products. Each solves another stage of the project.
- Control and programming: NiceWay transmitters, wall plates and control units.
- Oblonous automation: Nice and BFT motors for rolling and balanced oblones.
- Pergola automation: Nice Patio linear actuators.
- Adapters and supports: parts for the assembly of Nice GIRO engines.
- Common accessories: temperature sensor, electronic brake and additional motor.
Command the outer blinds with NiceWay
For an automation of the external blinds, the control counts as much as the engine. The NiceWay system starts from small transmitter modules. For example, Nice WM001G module send open-stop-closed orders, individually or in groups. His description indicates the management of up to 80 automations or 240 channels.
Then choose the support in which the module is located. Opla wall plates, like Nice WSB, Mount on the wall without building works. Instead, the WAX table holder or the Go touch make the portable module. So, you put the command right where you use it, by the window or the night.
Telephone control for shadow
If you want remote command, Nice Core interface connect radio automations to the Wi-Fi network. Its description explicitly lists the external blinds, horizontal blinds and obloneas. Thus, an automation of the external blinds with Nice radio receiver also receives orders from the phone.
Umbrella automations for shutters
Large rolling shutters, from commercial spaces or garages, use central motors on the axle. Nice Giro GR170 raises up to 170 kg and reaches 340 kg with optional additional motor. It has a brake and a release device, with a torque of up to 170 Nm. The Nice Rondo series covers 130 kg or 180 kg, in variants with or without brake.
At the same time, BFT WIND RMB 350B works with a 200 mm arch-tree and a maximum torque of 357 Nm. For mounting, the adapter subcategory offers Nice GRA02 adapter for 48 mm axle. Therefore, in oblones check the diameter of the axis and the crown before the control. Unlike an automation of the outer blinds, here the weight decides the model.
Shadowing automations for pergolas
Swivel-bladed pergolas use linear actuators. Kit Nice PATIOKIT1515 includes the Patio actuator from 1500 N to 24 V, the control unit and a temperature sensor. In addition, you can command separately Nice sensor PATIOSENSORT. In other words, the control unit also receives the temperature information, not just the command from the button.
The logic resembles the logic of an automation of the external blinds: an motor, a control unit and a control point. However, the linear actuator pushes the blades instead of running a web.
How to plan an automation of the external blinds
- Check the type of cage and whether the engine has an integrated radio receiver.
- Set how many windows you want to order together, on groups.
- Choose the control holder: wall plate, table holder or portable touch.
- Decide if you need to order from the phone via Nice Core.
- Plan the power supply of the engines before finishing.
Also think about the wind and the ice. An outer blind left down on the strong wind can deteriorate. Therefore, a well thought out external gate automation also includes group commands, to quickly lift all the gate.
Mistakes to avoid in shadow automations
Most problems arise before assembly, in the planning stage. For example, some customers choose the motor and only then think about the control. Others forget that the radio needs a compatible receiver on each motor.
- Cables drawn without space for the receiver or control unit.
- Window groups established after installation, not before.
- Different brand motors, which do not respond to the same remote control.
- Command points placed away from the window that you set.
So, first you make a sketch of the house with each window and each group. Then choose NiceWay transmitters and the place of wall plates. In this case, an automation of the outer blinds remains simple to use for the whole family.
Motoring the outer blinds: safety and mounting
Shadow engines work at 230 V or 24 V, so connections make them an electrician. In addition, in heavy commercial shutters, brake and manual release matter for safety. The standards for shadow products and motorized doors are found at ASRO. However, for an automation of the external blinds, the final option is chosen together with the installer, after verification on the spot.
Frequently Asked Questions about Automation Outer Jails
Can I order the blinds and gates from the same application?
Yeah, if both have compatible radio receivers. For example, Nice Core lists both gates and outdoor blinds.
How many blinds do a NiceWay mode command?
The description of the WM001G module indicates up to 80 automations or 240 channels. Thus, it easily covers a whole house.
What is the difference between an shutter and an external blind?
The rolling obbla is wrapped on an axis and protects the void. Instead, the outer cage has adjustable blades that adjust the light.
What motor do I choose for a heavy shutter?
First you look at the weight of the shutter. Nice Rondo goes up to 180 kg, and Nice Giro to 170 kg, extendable to 340 kg.
See all subcategories in Shadow automations. If you don't know how to build an automation external blinds or which shutter motor suits you, the Automatization Store team helps you choose.


















