Technical advice: 021 450 60 70 · Delivery nationwide · Blog

AUTOMATION
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Folding door motor: hydraulic BFT FORB or electromechanical IGEA

Industrial automation

Folding door motor: hydraulic BFT FORB or electromechanical IGEA

A folding door motor operates the boxes that open by folding, in the halls, warehouses, workshops or garages with wide opening. The choice holds the surface of the cane, the weight and how often the door works. The great difference occurs between hydraulic and electromechanical operators.

In short: BFT FORB hydraulic for very intense traffic, IGEA electromechanical for semi-intensive use, Nice HY for folding garages.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

The operator's choice starts from the existing door: how many panels it has, what surface each leaf has and how much it weighs. For very long runs, e.g. at loading ramps, BFT FORB hydraulic operators have the advantage of very intensive use. For moderate use, BFT IGEA LB and Nice HY offer 230 V and 24 V variants. Measure booths, count daily cycles and compare category models folding door automations.

A folding door is usually mounted on each leaf or on the main door pan. In fact, the folding door has articulated panels that tighten sideways, like a book. Thus, it releases the void completely without space in front of the door, which matters in the halls and warehouses.

Category folding door automations Find two BFT families and two Nice models. Then we compare them on concrete data: surface, weight, type of use and voltage.

Hydraulic or electromechanical folding door operator

First, the hydraulic operator uses pressure oil for motion. It therefore supports repeated cycles and provides hydraulic protection against crushing. Instead, the electromechanical operator uses a gear reducer and a clutch.

  • Hydraulics are suitable for very intensive use.
  • Electromechanical covers semi-intensive use.
  • Both types exist at 230 V, and the electromechanical is also 24 V.

In other words, the first step in choosing a folding door is daily traffic, not price.

BFT FORB: hydraulic operator for very intensive use

BFT FORB operate folding doors with a maximum of two panels and a surface area of up to 6 m2. The manufacturer shall also indicate it for very intensive use. In addition, it has hydraulic protection against crushing.

For smaller leaves, the range has two variants:

  • BFT FORB R, for surfaces up to 2,4 m2, with hydraulic retardation.
  • BFT FORB ERSA, all for 2.4 m2, with slowing of movements and automatic release.

So, at a big leaf choose FORB, and at small leaves choose R or ERSA. In addition, slowing down at the end of the race protects the swings and reduces shocks. At the same time, automatic release from ERSA helps manual maneuvering, for example, a power failure. This hydraulic folding door motor remains the natural choice for service gates used all day.

BFT IGEA LB: Electromechanical folding door motor

BFT IGEA LB is an electromechanical door operator with a maximum of two panels. Thus, the length of the panel reaches 2 m, and the weight of the door at 250 kg. The manufacturer indicates it for semi-intensive use, and the 230 V version has electric clutch.

On the other hand, BFT IGEA LB BT work at 24 V and use D-Track technology. However, the panel and weight limits shall remain the same: 2 m and 250 kg. Therefore, choose between the two after the desired power station and after the available voltage. A 24 V folding door generally accepts fine-speed adjustment.

Nice HY7100 and HY7124: for door folding garage

But Nice does not address the subject. HY models are electromechanical motors with galvanized and painted telescopic arm, for folding doors with two leaves. Thus, they fit well with garages and workshops with wide opening.

  • Nice HY7100 works at 230 V and has a race limiter on opening and closing.
  • The Nice HY7124 version works at 24 V and has magnetic encoder.

The telescopic arm transmits the motion from the motor to the leaf, i.e. push and pull the sheet. Therefore, the assembly requires space on the leaf and the wall for the arms race. Check this space before choosing a folding HY-type motor.

In addition, consider how the garage is used. For a workshop with dense outputs, the 24 V version with magnetic encoder offers precise stops. On the other hand, at a garage used occasionally, 230 V HY7100 simply solves automation. So, and at garages you choose a folding door motor after working frequency.

How to choose a foldable step-by-step motor

  • Number the panels: FORB and IGEA work with a maximum of two panels.
  • Measure the surface area of the cane and compare with 6 m2 or 2.4 m2 in FORB.
  • Estimate the weight of the door and compare with the limit of 250 kg in IGEA.
  • Sets traffic: very intensive, semi-intensive or occasional.
  • Choose voltage: 230 V for simplicity, 24 V for fine control.

Finally, add safety accessories recommended by the manufacturer, such as photocells and flashing light.

Safety at a folding door automation in the hall

Especially in halls, industrial doors work next to people and machines. Therefore, keep the folding area free and mark it clearly. The protection against crushing, present in FORB, reduces the risk, but does not replace the photocells. For the employer's obligations regarding work equipment, consult the information published by the Labour Inspectorate. The final solution is to establish it together with the installer after the site analysis.

Alternatives for other types of doors

If your door is not folding, choose another family of operators, because a folding door motor works only with articulated leaf. For large sliding doors, see Sliding door automation. Instead, for panel doors that climb under the ceiling, see Sectional automations. However, at an existing folding door, a dedicated folding door remains the correct option.

Frequently Asked Questions about Folding Door Motor

A folding door motor going to a three-panel door?

The BFT FORB and IGEA LB models in the range work with a maximum of two panels. Therefore, for other configurations, first discuss with the door manufacturer.

What does very intensive use mean?

In other words, the operator endures many cycles a day, such as at a loading ramp. At BFT, this class appears in FORB hydraulic operators.

Can I open the door manually to the power outage?

Usually, yes, through the operator's unlocking system. For example, FORB ERSA has automatic release. For other models, check the release mode in the technical file.

Do I choose a 24 V or 230 V folding door operator?

The 24 V version offers fine control and, usually, encoder. Instead, the 230 V version has a simpler scheme. Both exist at IGEA LB and Nice HY.

Compare hydraulic and electromechanical models in category folding door automations. If you don't know which variant fits your door, the Automatizări Store team helps you choose a suitable folding door motor.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).

Video clips played directly on YouTube (Google). When playing, YouTube can store data in the browser.