
Remote control for rollers: how do you combine NiceWay modules and supports
A remote roller control of the NiceWay system has two parts: a transmitter mode and a support chosen after the location where you use it. Thus, the same mode reaches the wall, the table or the pocket. It is especially important in houses with many rolls, oblonas or pergoses ordered from several rooms.
In short: choose the module after all the control automations, and then the appropriate support: Opla plate on the wall, Ondo on the table, Go or Portable Stone.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
The modular system saves you from new cables through walls and allows you to move command where you need it. A WM001G module controls an automation or a group, and supports transform it into a wall panel or remote mass control. Before ordering, check whether your engine receivers accept Nice transmitters and note which groups of reels you want to order. Then choose the module and support from the category control and programming.
A remote control for Nice range rollers doesn't come from one piece. The NiceWay system separates the transmitter module from the support you put it in. So, choose first what you command, then where and how you hold command.
Category control and programming You find modules, wall plates, table supports and portable heels. Below we take them in turn, with concrete examples in the range.
Module: Heart of a remote roller control
The module contains the electronic part, i.e. the buttons and radio transmitter. For example, Nice WM001G module Commands an open-stop-close automatism regime. In short, one press goes up the roller, another stops it, and another goes down.
In addition, as remote roller control, WM001G works individually or multi-grouply. Therefore, the same mode commands either a roll or a group of rolls at once. NiceWay range manages, according to the manufacturer, up to 80 automations or 240 channels. So a remote control for NiceWay rolls grows with the house.
Opla wall mounts: remote control for fixed rollers
Opla plates turn the module into a wall button. The manufacturer describes them as very thin as the plate itself. Especially, I don't ask for construction work, because the transmitter doesn't need cables.
As a form, the Opla control range has two variants, square Opla S and rectangular Opla R. At the same time, there are several colors:
- Plate Nice WSB, square, black.
- WST, square, transparent.
- WSS model, square, marine green.
- Plate Nice WRW, rectangular, white.
- Transparent WRT and marine green WRS variants, all rectangular.
Thus, an order for rollers on the wall matches existing switches. For example, you put a white plaque next to the terrace door and a black one in the bedroom.
Ondo table holder and magnetic fixing
Nice WAX Support The Ondo family combines white plastic with blue ice rubber. Basically, it keeps the module on the table, like a classic remote control. Then, with magnetic fixation Nice WWW, You're catching him on the wall.
In other words, the same remote control for rollers becomes wall panel or remote control of the sofa. The magnet allows you to take it and put it back without screws.
Remote control portable rollers: Go and Stone
For those who prefer the order in their pocket, Nice offers the Go heel. For example, The heel mini Nice WCG, grey closed, protect the module in anti-shock rubber. According to the manufacturer, Go makes every NiceWay transmitter portable and manages compact up to 240 channels.
On the other hand, the Stone bracket, like Nice White WEW, is anti-shock rubber and is oriented according to preference. So, a remote control for Stone-type rollers is better resisting in children's homes.
Wall, table or pocket: real scenarios
Each room has another habit of use. That's why it's worth thinking about ordering rooms, not products.
- In the living room, a remote control for rollers on the Ondo stand sits on the table and moves on the wall at night.
- Next to the terrace door, an Opla plate controls the group of rollers in the living area.
- The bedroom receives a separate mode, so that you do not accidentally lower all the rolls of the house.
- The office at home can use the Go bedding, for whom they often move between rooms.
So, the same type of mode appears in several supports, according to family habits. In addition, you can always add one more command, no new cables and no works. At the same time, it's worth labelling the groups at the start, so everyone knows what every button controls. In other words, a well-planned remote roller control reduces confusion in the first few weeks.
How to build a remote control for step by step rollers
- Count the rolls and decide which groups you want, such as ground floor, floor or southern face.
- Choose the module after the number of automations and the desired command type.
- Set where each command stands: wall, table or pocket.
- Matches the support with the decor: Opla colored plates, Ondo or Stone.
- Check if the receivers of the engines accept Nice transmitters.
Finally, you program the module on the receivers of the engines, following the procedure in the Nice manual. Thus, each button gets to command exactly the desired roll or group.
NiceWay transmitter for pergolas and oblonas
The same system is not limited to rollers. For example, control unit Nice PATIOCONTROL belongs to the Patio system for pergolas. For action itself, see Pergola automations. And for obloneas, consult Oblonous automations. However, check the compatibility between the transmitter and the receiver on each occasion.
Errors to avoid with a remote roller control
- Buying the support before the module.
- Programming all the reels on one button, no logical groups.
- Mounting the wall plate next to large metal objects, which can reduce the signal.
- Missing a list that every button commands, useful for service.
It also keeps the module manual, as the programming procedure differs from one receiver to another. For radio equipment there are European standards, and their list is found at Standardisation Association of Romania.
Frequently Asked Questions About Remote Roller Control
One remote control for rollers goes for the whole house?
Yes, in the multi-group mode the WM001G module commands several automations at once. However, for separate orders on rooms, choose more modules. Thus, each member of the family has his command, and the groups remain clear.
Do I have to break the wall for the Opla board?
No, because the Opla plates don't require building work. The transmitter works wirelessly, and the plate is simply caught on the wall. Therefore, you can move it later without any large footprints.
Can I move the remote from one support to another?
Yes, the NiceWay system is modular, so the module goes from the wall plate to the table holder or the heel.
Is a remote control NiceWay rollers going to other brands' engines?
Depends on the receiver and the radio protocol used. Therefore, it shall verify whether the engine receiver accepts Nice transmitters before the control.
Choose the right module and support from the category control and programming. If you don't know which combination suits you, the Automatizări Store team helps you choose a remote roller control compatible with your engines.



















